At present, we are one of a few producers that can provide NdFeB Compound for Injection Molding to the market.

Magnetic Characteristics Grade Residual Induction Coercive Force Intrinsic Coercivity Maximum Energy Product Br BHC IHC (BH)max. kGs T kOe kA/m kOe kA/m MGOe kJ/m3 NdFeB-Compound-4 4.1-4.9 0.41-0.49 3.2-4.2 256-336 7.5-10.0 600-800 3.3-4.7 26.4-37.6 NdFeB-Compound-5 4.5-5.3 0.45-0.53 3.5-4.5 280-360 7.5-10.0 600-800 4.3-5.7 34.4-45.6 NdFeB-Compound-6 5.0-5.8 0.50-0.58 4.0-5.0 320-400 7.5-10.0 600-800 5.3-6.7 42.4-53.6 NdFeB-Compound-7 5.4-6.2 0.54-0.62 4.0-5.0 320-400 7.5-10.0 600-800 6.3-7.7 50.4-61.6 NdFeB-Compound-5H 4.5-5.3 0.45-0.53 3.6-4.6 288-368 14.0-17.0 1120-1360 4.3-5.7 34.4-45.6 Other Physical Properties Density Tensile Strength Flexural Strength Izod  Impact Strength Hardness Rockwell Shrinkage Hot Distortion Temp g/cm3 kg/cm2 kg/cm2 kg.cm/cm Rscale % °C 4.5-5.5 500-510 880-900 5.5-6.8 110-112 0.04 115-118 Typical Parameters For Injection Molding Barrel Temp.(°C ) Mold(°C ) Jet Press  (kg/cm3) Gauge Press  (kg/cm3) H1 H3 HN 255 260 250 75-80 1320 95
	Remarks: 1. The above Grades are all based on HQP Powder and Nylon12, but we can provide     compound based on Nylon6 and PPS according to customer's demand.  2. The above Magnetic Characteristics and Physical Properties can be ensured according    to customer's demand.  3. Typical Parameters For Injection Molding is for customer's reference only. It needs     to be adjusted according to customer's technology and equipment.

Home

About Us

Products

Catalogues

Contact Us